Type 81 Grip Install Guide
Tools & Supplies Needed:
- 5mm Allen Wrench
- Thread Locker (Optional | Recommended)
Step 1: Remove existing grip Using a flat head screwdriver remove the original grip
Step 2: Remove dust cover & Recoil rod Push in the dust cover latch and remove the dust cover, then remove the recoil assembly.
Step 3: Install the new grip While holding the nut from the top begin to screw in the new grip with a 5mm allen wrench. Ensure the grip seats inside the grip ferrule, when the grip is all the way seated push it to the rear of the ferrule so it is flush with the back then tighten the rest of the way.